A written hazard communication program is the document OSHA requires from every employer whose employees can be exposed to hazardous chemicals, and the standard has no small-office exemption. Under 29 CFR 1910.1200(e)(1) it must describe how your office handles labels, safety data sheets and employee training, and it must include a list of the hazardous chemicals in the office and how you tell staff about the hazards of non-routine tasks.
Download the free template below: 3 pages of fill-in program with dental examples, and a one-page chemical inventory list.
What a written hazard communication program must include
The rule as it reads in the current eCFR: employers "shall develop, implement, and maintain at each workplace, a written hazard communication program" that at least describes how the office meets the rules for:
| Part | Rule | What it means for a dental office |
|---|---|---|
| Labels and other forms of warning | 1910.1200(f) | Keep supplier labels; label spray bottles and other containers you fill |
| Safety data sheets | 1910.1200(g) | An SDS for each hazardous chemical, accessible during every shift |
| Employee information and training | 1910.1200(h) | Train at hire and when a new chemical hazard comes in |
It also has to include:
- A list of the hazardous chemicals known to be present, using the product identifier on each SDS (1910.1200(e)(1)(i)). The list can cover the whole office or each work area.
- How you will inform employees of the hazards of non-routine tasks and of chemicals in unlabeled pipes in their work areas (1910.1200(e)(1)(ii)).
If employees of another company can be exposed to your chemicals, such as an equipment technician or a cleaning contractor, the program must also say how you give them SDS access and tell them about precautions and your labeling system (1910.1200(e)(2)). The program must be available on request to employees, their designated representatives and OSHA (1910.1200(e)(4)).
Free hazard communication program template
Written hazard communication program
complyday.comWritten program required by OSHA's Hazard Communication Standard, 29 CFR 1910.1200(e)(1). It describes how this office meets the rules for labels, safety data sheets (SDS) and employee information and training, and includes the list of hazardous chemicals and how staff are told about non-routine tasks.
Employees, their designated representatives and OSHA can see this program on request (1910.1200(e)(4)).
1. List of hazardous chemicals
The office keeps a list of the hazardous chemicals known to be present, using the product identifier on each SDS (1910.1200(e)(1)(i)). The list is on the last page of this program. It is updated when a product is added, replaced or no longer used.
2. Labels and other forms of warning
Containers from the supplier. Keep the manufacturer's label on every container. Labels are not removed or defaced unless the container is immediately marked with the required information (1910.1200(f)(9)). Supplier labels show the product identifier, signal word, hazard statements, pictograms, precautionary statements and the supplier's name, address and phone number (1910.1200(f)(1)).
Containers filled in the office (spray bottles of disinfectant, ultrasonic solution, diluted products) are labeled with either a copy of the supplier label or the product identifier plus words, pictures or symbols that give general information about the hazards (1910.1200(f)(6)). A container does not need a label only if it is for the immediate use of the person who filled it (1910.1200(f)(8)).
Labels are in English and readable. Information in another language, such as Spanish, may be added (1910.1200(f)(10)).
3. Safety data sheets
complyday.comThe office has an SDS for each hazardous chemical it uses (1910.1200(g)(1)), and keeps the SDS readily accessible to employees in their work areas during each work shift (1910.1200(g)(8)).
How employees get an SDS (check all that apply):
- Paper SDS binder. Location(s):
- Electronic SDS on a device in each work area. Device(s) and location(s):
- Online SDS service or app. Name and how staff open it:
- Backup if the computer or internet is down:
Electronic access is allowed as long as it creates no barriers to immediate employee access (1910.1200(g)(8)).
When a product arrives without an SDS, the coordinator requests one from the supplier or manufacturer before staff use it. When an updated SDS arrives, it replaces the old one in the binder or system, and the chemical list is checked.
4. Employee information and training
Employees get information and training on the hazardous chemicals in their work area when they start, and whenever a new chemical hazard they have not been trained on is introduced (1910.1200(h)(1)).
Information (1910.1200(h)(2)): the requirements of the standard; operations in their work area where hazardous chemicals are present; and where this program, the chemical list and the SDS are kept.
Training (1910.1200(h)(3)) covers at least:
- How to detect the presence or release of a hazardous chemical (odor, appearance, spills, leaking cylinders)
- The physical and health hazards of the chemicals in the work area, including simple asphyxiation, combustible dust, pyrophoric gas and hazards not otherwise classified where they apply
- How to protect yourself: work practices, PPE, emergency procedures (spills, eyewash, first aid)
- This program: supplier labels, the office labeling system, how SDS are organized and how to find and use one
| Employee (name) | Job title | Date trained at hire | New chemical training (date, product) | Trainer |
|---|---|---|---|---|
5. Non-routine tasks and other employers
complyday.comNon-routine tasks
Before an employee does a task with hazardous chemicals that they do not do every day, the coordinator tells them the hazards, the PPE and the steps (1910.1200(e)(1)(ii)). Examples in a dental office: cleaning up a mercury or amalgam spill, cleaning up a chemical spill, changing nitrous oxide or oxygen cylinders, changing x-ray processor chemicals, cleaning the sterilizer chamber with a descaler, deep cleaning the evacuation system.
| Non-routine task | Chemicals involved | Hazards and PPE | Who explains it |
|---|---|---|---|
Chemicals in unlabeled pipes
The standard also asks how employees are told about hazardous chemicals in unlabeled pipes in their work area (1910.1200(e)(1)(ii)). In a dental office this is usually the piped nitrous oxide and oxygen lines, if any.
6. Other employers working in the office
When employees of another company may be exposed to the office's hazardous chemicals (for example equipment technicians, cleaning contractors, construction crews), the office tells them where the SDS are, what precautions to take and how containers are labeled (1910.1200(e)(2)). The office also asks contractors which hazardous chemicals they bring in.
| Company and work done | Date | SDS access and precautions given | Chemicals they brought in |
|---|---|---|---|
7. Review and sign-off
The office reviews this program and the chemical list when products change and at least once a year (office practice). OSHA's 2024 update sets employer deadlines to update workplace labels, this program and training for newly identified hazards: November 20, 2026 for substances and May 19, 2028 for mixtures (1910.1200(j)).
| Date reviewed | Changes made | Reviewed by (name and title) | Signature |
|---|---|---|---|
Chemical inventory list
complyday.com| Product name (as on the SDS) | Manufacturer | Where used or stored | Signal word and main hazards | SDS on file (Y/N) | Date added | Date removed |
|---|---|---|---|---|---|---|
Use the product identifier printed on the safety data sheet (29 CFR 1910.1200(e)(1)(i)). Common dental examples: surface disinfectants and wipes, high-level disinfectants (glutaraldehyde or ortho-phthalaldehyde), phosphoric acid etchant, bonding agents and resin composites, impression materials, acrylic monomer, ultrasonic cleaning solution, sterilizer chemicals and descalers, x-ray developer and fixer (film offices), nitrous oxide and oxygen, and amalgam where still used. Keep old lists: a record of the chemical, where it was used and when must be kept at least 30 years if you discard old SDS (29 CFR 1910.1020(d)(1)(ii)(B)).
Open the printable hazard communication program or use the download button. The PDF prints on 4 letter pages:
- Program details, chemical list and labels. Coordinator, where everything is kept, and your rules for supplier and in-office labels.
- Safety data sheets and training. Paper or electronic SDS, who gets new ones, what training covers, and a training table.
- Non-routine tasks, other employers and review. Dental examples, piped gases, contractors, and a review sign-off table.
- Chemical inventory list. 20 rows: product, manufacturer, where it's used, hazards, SDS on file, date added and removed.
How to fill in the template
- Name a program coordinator, usually the office manager or a lead assistant, and write where the program, list and SDS are kept.
- Walk through every operatory, the sterilization area, the lab, the x-ray area and the storage closets. Write down every product with a hazard warning on its label.
- Find the SDS for each product. Copy the product name onto the chemical inventory list exactly as it appears on the SDS.
- Decide how staff label the bottles they fill. Printed secondary labels from the supplier, or the product name plus the hazard words and pictograms, both meet the rule.
- Choose paper, electronic or both for your SDS, and write a backup plan.
- List your non-routine tasks, such as a mercury spill cleanup or changing gas cylinders, and who explains the hazards before someone does them.
- Train each employee, record the date, and sign the review table.
Dental chemicals that usually go on the list
These are common examples, not a required list. Use what your office actually has, by the name on each SDS.
- Disinfectants: surface disinfectant sprays and wipes, and high-level disinfectants such as glutaraldehyde or its alternatives (for example ortho-phthalaldehyde).
- Restorative materials: phosphoric acid etchant, bonding agents, resin composites and cements, and amalgam where still used.
- Lab materials: acrylic monomer, impression materials, gypsum products.
- Sterilization and cleaning: ultrasonic cleaning solution, sterilizer chemicals and descalers, evacuation line cleaners.
- X-ray chemicals, where film is still used: developer and fixer.
- Gases: nitrous oxide and oxygen cylinders.
The standard does not apply to some items, for example drugs in solid, final form for direct administration to the patient, such as tablets (1910.1200(b)(6)(vii)), and consumer products used the way a consumer would use them, with no more exposure than a consumer would have (1910.1200(b)(6)(ix)). The office has to be able to show the consumer product exemption applies, so if a product is used more often or in larger amounts than at home, list it.
SDS binder: what goes in it
The SDS binder holds a safety data sheet for each hazardous chemical you use (1910.1200(g)(1)). Each SDS is in English and has 16 numbered sections in a fixed order, from section 1, identification, to section 16, other information (1910.1200(g)(2)). In practice:
- Put the SDS in the same order as your chemical inventory list, so anyone can match a product to its sheet.
- Replace an SDS when the supplier sends an updated one.
- Keep a copy in each area where staff use the chemicals, or one binder that every work area can reach quickly.
Electronic SDS are allowed. Under 1910.1200(g)(8), the SDS must be "readily accessible during each work shift to employees when they are in their work area(s)," and "electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options." In practice that means every employee can open the SDS on a device in their work area without waiting for someone else's login, and you have a backup for a power or internet outage.
Labels on chemical containers
- Supplier containers keep the manufacturer's label: product identifier, signal word, hazard statements, pictograms, precautionary statements, and the supplier's name, U.S. address and phone number (1910.1200(f)(1)). Don't remove or deface it (1910.1200(f)(9)).
- Containers you fill in the office, such as spray bottles of disinfectant, need either the same information or the product identifier plus words, pictures or symbols that give general information about the hazards (1910.1200(f)(6)).
- A container needs no label only if it is for the immediate use of the person who filled it (1910.1200(f)(8)).
- Labels must be in English. You may add Spanish or another language as well (1910.1200(f)(10)).
Hazard communication training
Staff get information and training on the hazardous chemicals in their work area at their initial assignment and whenever a new chemical hazard they have not been trained on is introduced (1910.1200(h)(1)). The standard does not set a yearly interval. Repeating it each year with your other OSHA training is office practice, not a requirement. Training must cover how to detect a chemical release, the hazards of the chemicals, how to protect yourself, and the details of your program, including labels and how to read an SDS (1910.1200(h)(3)). The full topic is covered in OSHA training for dental offices.
The 2024 update and the 2026 and 2028 dates
OSHA amended the Hazard Communication Standard in 2024, effective July 19, 2024. The first deadlines fall on chemical manufacturers, importers and distributors, which update their hazard classifications, labels and SDS. For employers, 1910.1200(j) as it reads today says to update, as necessary, any alternative workplace labeling, the hazard communication program and employee training for newly identified hazards:
- by November 20, 2026 for substances, and
- by May 19, 2028 for mixtures.
Until those dates, employers may comply with either the current standard or the version revised as of July 1, 2023, or both (1910.1200(j)(4)). Many dental products, such as disinfectants and bonding agents, are mixtures. In practice: when an updated SDS or label shows a new hazard, update your chemical list, your in-office labels and the next training.
California and other state plans
California has its own Hazard Communication standard, 8 CCR 5194, with the same written program requirement: a description of how labels, safety data sheets and training are handled, a list of the hazardous chemicals, and how employees are told about non-routine tasks (8 CCR 5194(e)). Other OSHA state plans adopt their own versions and can differ in details and dates, so check your state's standard.
Keep the program with your other OSHA plans
The hazard communication program sits in the OSHA binder with your exposure control plan. The chemicals on your list also decide where you need an eyewash station: see eyewash station requirements. Everything due each year is on the dental OSHA compliance checklist.
ComplyDay writes your hazard communication program, builds the chemical list from photos of product labels with links to each SDS, and includes hazard communication as one of the six yearly courses staff take on their phones.